GETTING STARTED

Welcome to the Mankati Fullscale XT Plus

To get perfect prints, you may need to experiment and tinker at the beginning.
This User Manual will guide you to start your journey with the Mankati Fullscale XT Plus easily and quickly.


Forget your existing knowledge of other 3D printers, take the time to learn about your Mankati Fullscale XT Plus, it will show you a completely new experience.
Print your idea right from now on!


How it works

Mankati Fullscale XT Plus 3D Printer makes solid, three-dimensional objects out of melted filament.
Your 3D designed files are translated into instructions for the Mankati Fullscale XT Plus and read by the machine via SD card.

The Mankati Fullscale XT Plus then heats the filament and squeezes it out through a nozzle onto a heated surface to build a solid object, layer by layer. This method is called Melted Extrusion Deposition [MED].

Prepareing the model for 3D Printing

Preparing the model

Use a 3D modeling software to output stl or obj format 3D model file.

MankatiUM 3D Printing Software

MankatiUM

MankatiUM is a software to prepare the gcode file for your Fullscale XT Plus.

In MankatiUM, you can set printing parameters for your model, such as layer thickness, printing speed and nozzle temperature, then output a gcode file for printing.

SD card for GCODE

Transfer the GCode file

Save the GCode file into the SD card, and insert it into the SD card reader of the printer.

Prepare the Fullscale XT Plus

Prepare the printer

Before 3D printing, you need to load the filament for the printer.

Start to 3D Printing

Print it!

Operate the knob beside the LCD and choose the model from the SD card inserted into the printer.