LCD Instruction


Info Screen

Info Screen Fullscale XT Plus

1. Actual Temperature of Nozzle 1;
2. Preset Temperature of Nozzle 1;
3. Actual Temperature of Nozzle 2;
4. Preset Temperature of Nozzle 2;
5. Actual Temperature of Build Plate;
6. Preset Temperature of Build Plate;
7. Cooling Fan;
8. Fan Speed Rate;
9. Filament Feed Rate;
10. Printing Process Bar;
11. Printing Time;
12. Build Plate Coordinate;

Press the knob to enter the menu:

1 - Prepare: The printer enters into ready state

1.1 - Auto home
The printer returns to original state ( In X.Y direction, the extruder returns to the left bottom in top view; In Z direction, the build plate returns to top position)

1.3 - Move axis:
Move 10mm: Move 10mm each step
Move X: Move 10mm each step in X direction
Move Y: Move 10mm each step in Y direction

Move 1mm: Move 1mm each step
Move X: The extruder will move 10mm each step in X direction
Move Y: The extruder will move 10mm each step in Y direction
Move Z: The build plate will move 10mm each step in Y direction
Extruder: The feeding motor of left nozzle will extrude the filament in each step of 1mm
Extruder2: The feeding motor of right nozzle will extrude the filament in each step of 1mm

Move 0.1mm: Move 0.1mm each step
Move X: The extruder will move 0.1mm each step in X direction
Move Y: The extruder will move 0.1mm each step in Y direction
Move Z: The build plate will move 0.1mm each step in Y direction
Extruder: The feeding motor of left nozzle will extrude the filament in each step of 0.1mm
Extruder2: The feeding motor of right nozzle will extrude the filament in each step of 0.1mm

1.4 - Preheat PLA:
Preheat PLA1: Preheat extruder and build plate to the working temperature of PLA required ( Default: Extruder, 210℃, Build plate, 45℃)
Preheat PLA2: Preheat extruder 2 and Build plate to the working temperature of PLA required ( Default: Extruder, 210℃; Build plate, 45℃)
Preheat PLA All: Preheat two extruders both and build plate to the working temperature of PLA required ( Default: Extruder, 210℃; Build plate, 45℃)
Preheat PLA Bed: Preheat build plate to the working temperature of PLA required ( Default: Build plate, 45℃)

1.5 - Preheat ABS:
Preheat ABS1: Preheat extruder and build plate to the working temperature of ABS required ( Default: Extruder, 235℃; build plate, 70℃)
Preheat ABS2: Preheat extruder 2 and build plate to the working temperature of ABS required ( Default: Extruder, 235℃; Build plate, 70℃)
Preheat ABS All: Preheat two extruders both and build plate to the working temperature of ABS required ( Default: Extruder, 230℃; Build plate, 70℃)
Preheat ABS Bed: Preheat build plate to the working temperature of ABS required ( Default: Build plate, 70℃).

1.6 - Leveling Bed: Build plate calibration assist-function. Rotate the button, the extruder will move to next position in clockwise direction from top view.

1.7 - Cool down: Cool down the extruder and build plate to normal temperature.

 

2 - Control: Adjust printer settings

2.1 - Temperature:
Nozzle: Left temperature setup
Nozzle 2: Right temperature setup
Bed: Build plate temperature setup
Fan speed: Cooling fan speed setup
Auto Temp: All the above data setup automatically

2.2 - Motion: Please do NOT change any data in this menu if without specialist experience.
Accel: Accelerated speed of extruder motion
Vmax x: Max speed in X direction
Vmax y: Max speed in Y direction
Vmax z: Max speed in Z direction
Vmax e: Max speed of feeding motor
Vmin: Min printing speed
VTrav min: Min travel speed
Amax x: Max accelerated speed in X direction
Amax y: Max accelerated speed in Y direction
Amax z: Max accelerated speed in Z direction
Amax e: Max accelerated speed of feeding motor
A-retract: Accelerated speed of retract
Xsteps/mm: Transmission ratio of X motor
Ysteps/mm: Transmission ratio of Y motor
Zsteps/mm: Transmission ratio of Z motor
Esteps/mm: Transmission ratio of feeding motor

2.3 - Restore Failsafe: Please do NOT change any data setting here in this menu.
2.4 - Save memory: Record the coordinate of printing stop
2.5 - Restore factory: Restore the manufacturer default settings
2.6 - Firmware version: Current firmware version