Mankati E180

For enginnering plastics,
for strong end-use parts.

Engineered for precision and designed for reliability, Mankati E180 is born to perform difficult 3D printing tasks with a wide range of materials.

With Mankati E180, you can realize complicated 3D prints with high quality easily, whatever professionals or beginners.

On-board Camera.jpg

On-board Camera

Together with cluster management and ethernet/Wi-Fi, enabling you to remote monitor your printer and enjoy your creation only.

LightCal.jpg

Auto Calibration

LightCal calibration technology gives auto and semi-auto calibration functions which offer precise and efficient calibration experience.

Wi-Fi and Ethernet Interface of Mankati E180

Ethernet and Wi-Fi

Forget about SD card now, you can start your print job just sitting by the computer, via your local network wirelessly.

 
Linear guide.jpg
Air Filter.jpg
Shortcut key.jpg

Linear Rails

To ensure the durability and precision, Mankati E180 adopts the industrial-grade motion system.

Air Filter

To bring your office in fresh air even work with the odorous materials, like ABS/HIPS.

Shortcut Buttons

With the three buttons, you can preheat nozzle, feed/withdraw or move the plate with just one step, it is even more efficient than a touch screen.


Nylon Series

mNylon 6
mNylon 66

PC Series

mPC-T
mPC-S

Fiber Reinforced

mPP-GF

General Series

mABS
mPLA

_1350121-32.jpg

Direct Manufacturing Functional Parts

 

Available Characteristics

  • 130℃/266℉ heat-resistant
  • High mechanical strength
  • Impact strength
  • High tenacity
  • Fatigue resistance
  • Oil resistance
  • Chemical resistance
  • Abrasion resistance
  • Steam sterilization
  • Mechanical polishing
  • ESD safe
  • Flame retardant
  • Self-lubricating
  • Isotropy
  • Uvioresistant
  • Light Weight

Wireless Control, Print and Monitor

With mRemote, you can achieve the basic operation of Mankati E180 and monitor the whole printing process just sitting by your computer. No need to shuttle between your printer and computer.

Cluster Management

It is a good news for the printing service providers, or the users who has multi Mankati E180 3D printers in hand. With mRemote, you can manage all your E180 3D printers and multi-task simultaneously, which will help you to improve your production efficiency extremely. 

Unboxing and First Run

Mankanti E180 Introduction

Performance Test

Specifications


Mankati E180

Technology:  MPM (Melted Plastic Modeling)

Build Volume: 180 × 180 × 200 mm (7 × 7 × 7.8 in)

Layer Height: 0.06-0.26 mm (0.002-0.01 in)

 

PerfBoard

Build Surface: Perforated Plate

Build Plate Maximum Temperature: 110 ℃ (230 ℉)

Removable Plate: Yes

 

mExtruder

Nozzle Diameter: 0.4 mm (0.016 in)

Extruder Maximum Temperature: 350 ℃ (662℉)

Materials Detection: Automatically pause printing when out of material

Cooling: Two direction air blowing printing area

Extruder Structure: full metal extruder for easy maintenance and repair

 

Software

Operating System: Windows 7/8/10

File Format: STL, OBJ, gcode

Slice and Print Software: Mankati mWare

Cluster Manage Software: Mankati mRemote

Software Language: English, Chinese

 

Hardware

Main Control Processor: STM32 ARM 32bits Chip

Embedded Processor: Dual Core 1.2 GHz ARM Cortex Chip

On-board Storage: 4 GB

Positioning Precision (X/Y): 1.5 Microns

Positioning Precision (Z): 1 Micron

Interface: Wi-Fi, Ethernet, U-Disk

Air Purification: Yes

On-boarad Camera: Yes

 

Material

Available Materials: mPP-GF, mNylon 6, mNylon 66, mABS, mPC-T, mPC-S, mPLA, etc. 3rd party materials.

Material Diameter: 1.75mm(0.096in)

Package

Device Dimensions (Without Spool Holder): 340 × 345 × 490 mm (13.4×  13.56 × 19.3 in )

Device Net Weight: 15 kg (33 lb)

Package Dimensions: 485 × 495 × 635 mm (19×  19.5 × 25 in )

Package Weight: 27 kg (59.5 lb)